![VMS](/img/default-banner.jpg)
- 46
- 603 388
VMS
Poland
Приєднався 31 сер 2016
Welcome to VMS UA-cam Channel!
How to make muddy diorama base with real earth and pebbles texture for your tank - VMS tutorial
Texturing your diorama made easy. With VMS texturing material you will create authentic looking terrain with little skill needed!
00:07 Intro
00:22 Creating the base of the diorama
03:07 Texturing the diorama
10:33 Adding foliage to the diorama
12:31 Final result
00:07 Intro
00:22 Creating the base of the diorama
03:07 Texturing the diorama
10:33 Adding foliage to the diorama
12:31 Final result
Переглядів: 4 624
Відео
How to remove stains and bad weathering effects from a scale model - VMS tutorial
Переглядів 1,7 тис.9 місяців тому
00:07 Intro 01:28 Pigment staining problem explained and fixed, VMS Stain Remove vs. weathering thinners 05:54 Removing pigment binders so as to remove stains 07:04 Removing pigment stain example #2 Patton Tank Turret 08:14 Pigment stain vs. clean paint surface
How to build and texture a diorama with gravel and sand - VMS Tutorial
Переглядів 4,2 тис.9 місяців тому
Quickly texture your diorama base with these easy to use products 00:11 Texturing - coarse fraction 02:05 Texturing - fine fraction 03:10 Painting the diorama 04:02 Retouching the diorama elements 05:46 Final result
How to make winter camo on model tank - VMS Chip & Nick white tutorial
Переглядів 3,4 тис.9 місяців тому
Check out how to create 2 tone winter camouflage on a model tank! 00:19 Applying the first paint layer 03:05 Applying a second paint layer 07:03 Aging the white colour
How to create realistic chipping effects on model tank VMS Chip & Nick tutorial
Переглядів 6 тис.9 місяців тому
If you are wondering how to create chipping effects with minimum effort, even if you are a beginner os simply lack the patience, our special paint will help you out! 00:19 Sponge chipping technique brown colour 05:42 Dry-brush chipping technique 07:31 Sponge chipping technique dark grey colour 09:42 Sponge chipping technique rust effects 11:47 Other chipping examples
Weathering of model military truck wheels - a quick tutorial
Переглядів 4,8 тис.10 місяців тому
Weathering of model military truck wheels - a quick tutorial
How to restore an old model brush in minutes - VMS Brush Restore+ Tutorial
Переглядів 1,6 тис.10 місяців тому
Learn how to efficiently fix a hobby brush. Using this protocol you can deep clean a brush in several minutes. You need to soak the brush in Restore Brush fluid an then tap the bristle so that paint chunks are loosened and removed. Wipe the brush using a paper towel and then soak it again to make sure you got rid of all of the residue. This way you may save expensive red sable brushes and also ...
Desert model weathering Cruiser tank tutorial part #2
Переглядів 2,6 тис.Рік тому
Desert model weathering Cruiser tank tutorial part #2
Desert model weathering Cruiser tank tutorial part #1
Переглядів 3,6 тис.Рік тому
Desert model weathering Cruiser tank tutorial part #1
Weather metal tracks VMS enamel binders Tutorial pat 5
Переглядів 1,1 тис.Рік тому
A new and improved version of our tutorial featuring Vietnam war M113 APC. Enjoy!
Weather a model rust smoke and burnished steel effects VMS enamel binders Tutorial pat 4
Переглядів 1,4 тис.Рік тому
A new and improved version of our tutorial featuring Vietnam war M113 APC. Enjoy!
Weather a model with pigment filters VMS enamel binders Tutorial pat 3
Переглядів 1,4 тис.Рік тому
A new and improved version of our tutorial featuring Vietnam war M113 APC. Enjoy!
Weather a model and create spatter and streaking effects VMS enamel binders Tutorial pat 2
Переглядів 1,3 тис.Рік тому
A new and improved version of our tutorial featuring Vietnam war M113 APC. Enjoy!
Weather a model and create mud effects VMS enamel binders Tutorial pat 1
Переглядів 1,9 тис.Рік тому
A new and improved version of our tutorial featuring Vietnam war M113 APC. Enjoy!
Weather tank tracks with VMS Alkyd binders weathering Tutorial Part 4
Переглядів 2,9 тис.Рік тому
Weather metal tracks like a pro with minimum skill required.
Weather a model tank with pigments damp earth effects VMS Alkyd binders weathering Tutorial Part 3
Переглядів 2,5 тис.Рік тому
Weather a model tank with pigments damp earth effects VMS Alkyd binders weathering Tutorial Part 3
Weather a model tank with pigments dry earth effects VMS Alkyd binders weathering Tutorial Part 2
Переглядів 4,4 тис.Рік тому
Weather a model tank with pigments dry earth effects VMS Alkyd binders weathering Tutorial Part 2
Make realistic dry mud on a tank model - VMS Alkyd binders weathering Tutorial Part 1
Переглядів 7 тис.Рік тому
Make realistic dry mud on a tank model - VMS Alkyd binders weathering Tutorial Part 1
Fix tough decals on your model - painted on effect with VMS Decal Set & Soften
Переглядів 3,9 тис.Рік тому
Fix tough decals on your model - painted on effect with VMS Decal Set & Soften
Assemble plastic tank tracks using individual track links - VMS Styrene Cement slow tutorial
Переглядів 7 тис.Рік тому
Assemble plastic tank tracks using individual track links - VMS Styrene Cement slow tutorial
Make fine anti slip coating on a Stryker model - VMS Hull Tex Air tutorial
Переглядів 2,9 тис.Рік тому
Make fine anti slip coating on a Stryker model - VMS Hull Tex Air tutorial
Make anti slip on Merkava & Abrams model tanks - VMS Hull Tex tutorial
Переглядів 11 тис.Рік тому
Make anti slip on Merkava & Abrams model tanks - VMS Hull Tex tutorial
How to weather and burnish metal model tank tracks VMS Black Track Pro Tutorial
Переглядів 2,8 тис.Рік тому
How to weather and burnish metal model tank tracks VMS Black Track Pro Tutorial
How to paint model wheels with Liquid Mask VMS tutorial
Переглядів 3,4 тис.Рік тому
How to paint model wheels with Liquid Mask VMS tutorial
How to prime metal model parts - fix peeling & flaking paint problem VMS Metal Prep for photo etched
Переглядів 3,7 тис.Рік тому
How to prime metal model parts - fix peeling & flaking paint problem VMS Metal Prep for photo etched
Glue model clear parts like a boss - VMS Transpa FIX tutorial
Переглядів 8 тис.Рік тому
Glue model clear parts like a boss - VMS Transpa FIX tutorial
Remove super glue from a plastic scale model - VMS Glue Remove Debonder tutorial
Переглядів 20 тис.Рік тому
Remove super glue from a plastic scale model - VMS Glue Remove Debonder tutorial
How to apply and varnish model decals - VMS classic decal solution
Переглядів 4,3 тис.Рік тому
How to apply and varnish model decals - VMS classic decal solution
How to make canvas covers and tarps on a scale model - VMS Paper Shaper tutorial
Переглядів 10 тис.Рік тому
How to make canvas covers and tarps on a scale model - VMS Paper Shaper tutorial
Learn how to make cheap airbrush thinner & cleaner for model paints VMS concentrates tutorial
Переглядів 3,7 тис.Рік тому
Learn how to make cheap airbrush thinner & cleaner for model paints VMS concentrates tutorial
Definitely buying these, the advice on how to remove varnish is a game changer for me, awesome video!
Glad you liked the video and thanks a lot for your kind comment! Happy modelling, Chris
Will this stuff remove Loctite Control gel from a clear plastic windshield without melting the clear styrene?
Hello, Product attacks all CA (super; cyanaocrylate) glues and doesn't attack styrene also the clear variety. Depending on how aggressive the Loctite product is there may be a stain left (crazing) where the glue was after you remove it which may require polishing to get rid of. Chris
Man I want to get ancairbrush just to try this
Definitely worth it, the varnish is amazing and the experience very rewarding. Even low cost Chinese airbrush (all metal not those crappy ones made of plastic) will do, just the nozzle needs to be at least 0.3 or best 0.4. Happy modelling, Chris
Can Metal Prep 4k be airbrushed onto complex surfaces, or is it only suitsble for brushing?
Hello, guys spray it, so the answer is yes. 😀
Tell me why delivery charges to the Uk cost $9,999,999.00💀 what a scam
This is a Brexit related restriction, but you can still buy in our second outlet, details: www.vms-supplies.com/store-lobby
Great Video, before I buy, I am just curious about how long does it take for the PE part to be somewhat firmly attached? Because I usually want to move on to the next step of assembly and I don't want to waste time by letting it dry for 24 hours. Does it pretty much get solidly attached in a minute or you have to wait for 24 hours? Thanks in advance for answering.
Hi there! Glue grips in seconds so you will be able to work at your preferred pace. The glue comes in several variants and there is also a dedicated debonder and filler powder which turns our glue into a fast curing putty. Happy modelling! Chris
It's really a good product, I spread this with my brushes and I leave it for about 30 min there, it takes off about 80% of the paint. I will try with softer brushes if they help the efficiency of this product. I put this in a spray bottle, but I regretted, it wasn't useful. Maybe a sponge will do the trick, but I'll see
Thanks a lot for your comment, glad the product worked out for you! Chris
Hi, newbie question here - when you spray the model, do you spray the entire thing? or do you spray in sections? I'm asking as it seems like the self levelling of the product would pool at the bottom of the sides (due to gravity) unless you place the model side up. Hope that makes sense?
You can spray the top and side sections of model first then once it's dry you can do the bottom. The product will not run down due to gravity on vertical surfaces unless you really overdo it, no need to worry, it's user friendly. It's more a question of handling - you simply can't move the model around it it's wet, without disturbing the varnish with your fingers. Spray the top then the sides first, wait till dry, flip it and spray the bottom.
@@Vmssupplies , thanks for replying, much appreciated!!
i like this! but cant find this product or in amozon.
Amazon is garbage when it comes to listing and offering modelling goods. Boy, the hoops they make you jump to list an item are unbearable. We recommend eBay or model stores, they have it all.
I’d say that it’s very much like chocolate brownie icing. Thank you VMS
Ha ha, good one! Chris
@@Vmssupplies cheers VMS and keep those products rolling out so I can buy them! 🇦🇺
Can you use the alkyd binder with 3D printed resin tracks?
Sure, no problem here. Chris
With the debonder how big of a risk is it that with cleaning glue parts also the PE parts will get loose again?
There is not much risk as the glue is not easily penetrated (it takes time) and even if affected will solidify once the debonder is gone, moderation and careful application are the key.
@@Vmssupplies Awesome, thx :)
good product!but i don‘t konw how to buy this,so sad QAQ
Use Google. 😉 Cheers, Chris
Thanks Dude!
You got it!
Best liquid mask I have tried.
Cheers mate! Glad you found it of use! Chris
Und das löst auch nicht den Kleber auf der die Teile zusammenhält?
Nein, mit Plastik-Kleber verklebte Teile (Verschweißung Effekt) gibt es kein Problem. Einige Ätzteile können sich vom Kunststoff lösen, dies hängt von der Stärke der Klebeverbindung ab.
@@Vmssupplies welchen Kleber verwendest du wenn ich fragen darf?
Nice tip, I will have to find some of this glue and try it out. At present I am using a 5 minute epoxy with better results then CA glue.
Cheers mate!
Can I varnish with a brush?
Yes, but the result may be inferior to one done with an airbrush. If you paint a lot with a brush the result will be similar to what you achieve with paints. Happy modelling, Chris
Hello, what are the signs that alerts you when a new bottle should be bought?
Hello, thickening of the glue and slow bond formation. But don't worry current formula goes a long way. It will be years before this can occur and if you keep your glues in a fridge you can extend shelf life dramatically. Chris
@@Vmssupplies Thank you, I bought one bottle like 1 and a half years ago and I think it showing those signs. So I should put it in a fridge so I can extend it life time?
Can the 3D glue be used with photo etch?
Yes it will work, so you can glue PE to 3D printed or plastic parts if necessary. Chris
Can you recommend a glue that can bond painted surface to panted surface without sanding
You can use Transpa glue or CA glue but it depends on parts you are trying to glue, their size, placement how much tension there is plus the paint coat needs to be sturdy enough not to separate from plastic. What type of parts are you trying to glue together?
@@Vmssupplies Chrome bumper to body which is tamyia clear (TS-13)
can this work with gunpla?
Hi, this works on polystyrene, metal, resin so it's important that your models is made of one of these materials. Gunpla is probably made of polystyrene like 99% of models so it will work. :)
This looks like you added an oil based crayon to it beforehand,if this strips the varnish off as well,its seems to be a bit sketchy,convince me otherwise as your products are not cheap. Thanks
Hi there, and thanks a lot for commenting. The product does exactly what we show in the video, removes stubborn pigment residue, that is left after you have used weathering solvents (white spirit odourless turps etc). This is not a solvent so it doesn't affect varnishes. If we cheated in the videos we wouldn't last, company was founded 2016 and is going strong, you can expect good results from our products. Best regards, Chris
Chris,thank you for your quick reply ,the CA flexy glue and debonder are great when I have been an,I know what I am doing and a plonker moment,i will give your other products a go,the company seemingly is gaining great traction across many parts of craft building.
Think a couple steps were skipped. And yes I did watch part one.
Yup it's an edited footage focusing on weathering. Hope it's still of use. Thanks a lot for watching and your comment! Chris
@Vmssupplies I need more especially engine wear and combat damage.
Użyłem dziś pierwszy raz i muszę powiedzieć że jestem pod bardzo dużym wrażeniem produktu. Super efekt 😃🤝🥇🏆
Dzięki Paweł! Pozdrawiam, Krzychu
My favourite satin varnish!
Cheers mate!
Can this product be used on metal miniatures?
Sure, metal minis are compatible. Chris
I've just used this product for the first time (ultra). Model is a Tamiya car body with a few layers of Vallejo water based, Tamiya acrylic and humbrol enamel. Compounded errors. Time to start again. Paint began to peel very quickly. I haven't soaked it but have gingerly applied product with a paint brush. Vallejo base coat and primer left which I will try again. My observation so far is that it is working but I wouldn't recommend this product for children. If you can, apply product outdoors with plenty of ventilation. Wear a respirator minimum P2 and gloves resistant to solvents. I began applying this indoors without a mask and the smell quickly took hold of me making me feel a little dizzy.
Thanks a lot for your extensive feedback, happy to hear the prduct worked. To all modelers out there: Please always read the label - we advise to use product outdoors or in a well ventilated area and list all precautions/health hazards on the bottle.
I wonder how well these would turn out placed inside a ultrasonic cleaner for a short time.
You mean like with the blackening fluid instead of water? If so this could prove to be a faster and more efficient process. Good thinking.
Videos just get better and better Chris, I prefer the sound off and captions , that voice is most off putting !
Cheers mate!
Would this debonder work on a vinyl toy figure without messing up the paint?
Hello, Product can attack paint so one needs to make trials to know.
Really cool tutorial.
Cheers mate!
How you clean the brush? Thx
With tap water while the product is still wet, once dry you can only comb it away. Chris
No-one who's ever driven or been in/on an AFV would drape a tarp as casually as most modellers do. I understand the technique but honestly... it's really naff and unrealistic. Ever seen a tarp or cam net after it's been anyway near a hot surface such as engine louvres or exhausts, or been dragged into the running gear? My unit rolled and strapped everything down - tight; like professionals would. Imagine driving through woodland or scrub and having anything not tied down ripped off. In my honest opinion it makes it look like, well, a model.
I believe every modeller out there should read this comment, thanks a lot for the insight! Chris
When you don’t have a .4 nozzle but a .3, is it possible to thin the satin varnish with water or tamiya lacquer thinner retarder type?
Hello, As long as your tool is proper clean 0.3 nozzle will spray OK and you can slightly dilute with our acrylic thinner (green label) as well. Lacquer thinner is incompatible since this is a water based product.
what would be the best and cheapest option to glue on a headlight to a car without the glue showing clouding
Hello, The VMS Transpa FIX glue which is featured in this video. Standard glues will always cloud clear plastic, Transpa will not and is reversible - you can remove any excess glue with ease for a clean job. Chris
@@Vmssupplies thanks can I have a link we’re to buy?
I have had this happen to me twice now, and i was hopeing you could tell me why. Using a thin ca, (not your brand) to glue 1/2 x 2 inch pieces of pe into a rectangle of fairly thick styrene caused the styrene frame to just break apart into three pieces. I didnt clamp it, or drop it, it just broke apart. Any thoughts?
Hello, that's quite peculiar. Can you post a photo in our Facebook Club?
question about clear parts i use humbrol clear fix do i really have to leave it for 24hours for it dry ?
24h is fully cured, you can work faster, applied glue will hold fine from the start and dry up in the mean time. This formula is way better than clear fix as you can redissolve the glue and correct imperfections if necessary.
@@Vmssupplies Ah ok thanks for advice I just get worried about gun sights on planes thats all and canopies.
are these hd varnishes lacquer or waterbased acrylics?
Water-based, user friendly product.
@@Vmssupplies oh my god thank you so much for making this! ive been looking for so long for a good varnish thats waterbased. also once the gloss dries, will it react with any thinners?
Is it a one time use fluid?
You can use it till it stops blackening your tracks. Big tracks - quicker potency loss, small tracks more use.
@@Vmssupplies Thank you
can you use this on ammo migs waterbased acrylic paints?(with either a vallejo gloss or a matt varnish from ammo)
Sure, there are no constrains regarding setting solution, just be careful with the softener as we show in the video.
@@Vmssupplies thanks for the reply! will definetly buy atleast one of these! also one more question. are the hd varnishes lacquer or waterbased?
Interesting tutorial. Product seems fine, but 1/700 scale PE needs much finer applicator tools. Be curious as to the curing time?
Thanks! For finer scales just use finer wire. Curing time is seconds depending on air humidity the more water in the air the quicker the curing. Chris
Does it need to be thinned in an airbrush. Mine is 0.2mm
No thinning needed.
I glued the landing gear on backwards. I used super glue. Will this help remove them?
Yes, it will dissolve the glue and allow you to separate parts.
Perfect video. I did all the mistakes on my first project. Now I know what happend, thanks! Subscribed.
Thanks, glad you found it useful! Chris
Very informative. Great video. Thanks.
Cheers mate!
I deeply appreciate the mud and dust effects on my AFV kits and dioramas, although I sometimes go overboard. In the past, I’ve experimented with acrylic, enamel, and oil-based products to replicate these effects, but I’ve never been delighted with the results. The Alkyd binder method seems promising, and I’m eager to explore it further.
Hi, Alkyds look even better in reality. I advise you take some spare tank road wheels, paint them and experiment on them, this is a lot of fun and a great way to get the hang of things before you move on to an actual model. Thanks a lot for your feedback, Chris
This seems to be just what I've been looking for. I ruined a Revell VW Camper van by having glue stained windows before I knew about this product. I will give this a try.
Glad you found it useful and thanks a lot for your feedback! Chris
Phenomenal stuff, just a question though. What would be the main advantages compared to just using graphite powder? Thanks in advance :)
Pure graphite will be easily removed, not durable, this approach makes things permanent but reversible with thinners.
@@Vmssupplies you convinced me, gotta get some as soon as I got the chance!
One problem I've had with all super glues in the past is that it eventually dries and can no longer be used (even cleaning the nozzle doesn't help since the bottle completely dries out). Do you have an estimated shelf-life (after opening) for this? edt: oh just found the FAQ, 12-24 months
Hello Julius, current, improved formula can last even longer 3-4 years if stored well. Dried bottles are a thing of the past. Chris